KORG NTS-2
The Nu:Tekt NTS-2 oscilloscope kit is a DIY multifunctional tool for musicians. Building on a 4-channel oscilloscope - monitoring control voltage (CV) and audio signals alike - NTS-2 also packs a flexible waveform generator, a spectrum analyser, and tuner functionality into a build-it-yourself device which fits in the palm of your hand!
A complete musical toolkit
The NTS-2 kit is compact and easy to assemble with no soldering required, but don’t let its size fool you – it packs a real punch! The NTS-2 is an oscilloscope, tuner, FFT, and spectrum analyser that is accurate, intuitive, and incredibly useful.
But that’s not all – using its dual stereo IN, dual stereo THRU/OUT, and two separate OUTPUTs, you can wire it into your synth rig and use its dual waveform generators to give yourself an extra pair of oscillators or LFOs!
See your sound
Synths are musical instruments first and foremost. Waveforms, frequency and time relationships, audio signals, and control voltages become crystal clear if you can visualise, as well as hear, the changes you make.
NTS-2 is, for the first time, an oscilloscope designed with the musician in mind! The NTS-2’s interface is simple, clean, and easy to use; you can look at your signals and understand them in a matter of seconds.
Build it yourself
As with other Nu:Tekt products, the NTS-2 is a DIY kit that is extremely easy and quick to assemble. For maximum portability and flexibility, NTS-2 can be powered by batteries or a USB-C power supply, depending on your needs.
12.9 x 7.8x 3.9 cm
130g (not including batteries)
USB type-C (2.0, 500mA max) or 2x AAA batteries (approx 2 hours running time)
2 x 3.5mm Stereo
±10V max
2 x Through Output: 3.5mm Stereo
2 x Output: 3.5mm Mono
±5V max
Display modes:
Single, Stereo (Input1L-INPUT1R, Input1L - Input2L, Input2L - Input2R), 4ch、XY(Lissajous, 2ch)
Vertical:
10mV~5V/div, AC/DC MODE switchable
Horizontal:
50us~1s/div
Trigger:
Auto, Rise, Fall, Single(rise), Single(fall)
Input:
mono (1L, 1R, 2L, 2R)
Frequency:
20Hz~20kHz
Wave type:
sine, square, triangle, saw, noise, pulse, envelope
Frequency:
1Hz~10kHz, Hz/NOTE mode switchable,
[1ms~10s,sec/BPM switchable(pulse, envelope mode)]
Output level:
10Vpp max, V/dB mode switchable
Display mode:
Needle, Meter
Input:
Mono, Stereo (Input1L-Input1R, Input1L-Input2L)
Calibration:
410-480Hz