Synths and Accessories for Music Producers
Cart 0
Synths and Accessories for Music Producers
Cart 0
EDS-3
EDS-3

EDS-3

£95.00 £0.00
VAT included. Shipping calculated at checkout.

A highly expandable three-tier stand primarily for use with Eurorack desktop synths.  Mix different HP widths or non-Euro gear on the same stand.  Add a fourth tier with our EDS-UX upper expander.  Dock a keyboard in the lowest tier using our unique EDS-LA lower adapter.  Place a Keystep directly on the table in front of the stand with room for cables to pass under the lowest synth.  See Stand Selector for full details.

Fits

  • Behringer Cat, K-2, Model D, Neutron, Pro-1, Wasp Deluxe
  • Behringer Crave (requires Adapt Wings)
  • Moog DFAM, Mother 32, Subharmonicon
  • Radikal Technologies Delta CEP A
  • Skiffs up to 7" (175 mm) deep
  • Skiffs or other gear up to 10" (250 mm) deep if Adapt Wings installed
  • Roland Boutique, Blofeld or Pulse 2
  • Korg Volcas when used with Volca Tray

Features

  • Sleek, compact, sturdy
  • Expandable to meet your changing needs
  • Adjustable width telescoping metal tubes (not all photos updated to show telescoping tubes)
  • Rubber feet and lining for silence and stability
  • Plenty of room for cables (audio, power, USB) in all three synths
  • Precision manufactured in the USA by synth fanatics

    Advantages over Behringer metal stand

    • Accepts a mixture of different synth widths at the same time
    • Accepts controllers, small skiffs (upper-tier only), and non-Euro synths 
    • Fits many brands of Euro desktop synths since side panel screws are not used
    • Quick, tool-free setup and teardown
    • Can add an extra tier later as your collection grows

    Dimensions

    • Width:  adjustable from 6.3" to 10.1" (159 to 257 mm).  Knobs stick out additional 0.5" (12 mm) per side
    • 14.3" deep x 10.2" tall (362 x 259 mm) 
    • Support edge depth (lower tier) :  4.32" (110 mm)
    • Support edge depth (middle tier):  5.10" (130 mm)
    • Support edge depth (upper tier) :  4.53" (115 mm)
    • Gear on the upper tier can overhang the rear of the stand by roughly 1/3 of the support edge depth.  If an extra set of optional Adapt Wings is installed at the upper rear edge, then an additional 3" of overhang may be possible. CAUTION:  You should carefully determine if your overhanging gear will be stable.  In some situations, an additional set of Adapt Wings should be installed at the bottom rear to act as a "kickstand".

     Compatible Accessories

    Quantity in parentheses ( ) indicates if more than one of accessory can be used.