Synths and Accessories for Music Producers
Synths and Accessories for Music Producers
Cart 0
Gear Rail
Gear Rail
Gear Rail
Gear Rail
Gear Rail
Gear Rail
Gear Rail
Gear Rail

Gear Rail

Regular price £138.00 £0.00 Unit price per
Shipping calculated at checkout.

This is the desktop cousin of our innovative SubPiggy stand. Unlike the SubPiggy, the Gear Rail doesn't contact the synth. It's ideal for holding Eurorack skiffs above CV ports of the Matriarch, Grandmother, Pro-2,  Pro-3, Matrixbrute, Minibrute 2, Waldorf KB37, minilogue, and many others. It can make performing and playing much easier by allowing you to place fx pedals, a controller keyboard, a desktop synth, a looper, a drum machine, a laptop, or a tablet within easy reach of a large synth's control panel. You can even use it to hold outboard gear above the back edge of a 32-channel mixer!

Gear support arms on the Gear Rail can be easily repositioned or rearranged and locked in place. Add or remove support arms as your needs change.  Or change the length of the Gear Rail with our Tube Extender Kit.

Features:

  • Lengths to fit almost any 25 to 49 key synth (26.625" is for Grandmother, 32.75" is for Matriarch and Hydrasynth).  Greater distances are possible with our Tube Extender Kit.
  • The maximum total weight of gear on Gear Rail is 6.8 kg (15 lb). You can exceed this weight limit if you're careful not to push or pull on the fully-loaded stand.
  • Gear support arms are 6.75" (171mm) deep and are available angled or flat (horizontal).
  • Thick rubber trim prevents gear from sliding around on the arms.
  • Angled arms can hold: Deluge, Reface, iPad, and much more

Fits on angled arms:

  • Moog Mother-32, DFAM, Subharmonicon
  • Behringer Neutron, Model D, Wasp Deluxe, Cat, K-2, Pro-1
  • Elektron (haven't tested Mk II angled body models yet)
  • Hydrasynth desktop
  • RD-8
  • Crave
  • Yamaha Reface keyboard (requires HE-2 hook extenders)
  • TR-8S (tendency to tip backwards; only install if there's a wall immediately behind it)

Fits on flat arms:

  • Moog Mother-32, DFAM, Subharmonicon
  • Behringer Neutron, Model D, Wasp Deluxe, Cat, K-2, Pro-1
  • TR-808, TR-909
  • Elektron, Maschine, MPC, minikey keyboard, and much more
  • Korg Minilogue
  • Minibrute, Microbrute, MicroFreak

Dimensions:

  • Flat Arms: 8.12" (206 mm) table to bottom of gear
  • Angled Arms: 7.69" (195 mm) table to the bottom front of gear; 34-degree angle. 11.47" (291 mm) table to the upper rear corner of the support arm

Optional Accessories:

Includes:

  • (2) end panels
  • (2) angled, and (2) flat arms with locking collars 
  • (2) rigid support tubes 676mm (26.625")
  • (4) steel/plastic knobs